5 Best Brake Calipers for Your Car

Brake calipers are essential for your vehicle’s stopping ability. Most cars today have disc brakes that use this part to create friction on the tire’s rotor.

The caliper fits over the rotor like a clamp. Then you would install brake pads that safely compress against it using pressure from the caliper to stop the momentum of your car.

What Are the Best Brake Calipers for Cars?

If you have excellent brake pads but poor calibers, then your stopping ability becomes immediately reduced. That’s why you’ll want to consider an upgrade to one of these products today.

  1. Detroit Axle Rotor Kit

When it is time to replace your calipers, then you probably need to update your rotors at the same time. This kit allows you to do both for the front and rear wheels of your car. The product comes with a 10-year warranty that protects your investment into the single-piston rear calipers and other hardware. The size of the standard unit is 325mm, so you’ll need to inspect your vehicle to ensure the correct fit occurs.

The products are all made to the original equipment standards of automakers to provide the superior stopping performance you require. It gives you everything you need, including grease for the slide pins.

  1. CCK Semi-Loaded OE Caliper Kit

This caliper set is remanufactured with brand-new components so that you receive an expected fit for your vehicle. Each product is 100% pressure tested to ensure that it works correctly without any leaks. Look for your make and model when shopping for this product to ensure that you get the kit needed for your needs. It comes with the pins and hardware required to complete your repair.

The work comes from Callahan, so you can rest assured that the quality of the product meets or exceeds your expectations. You’ll receive the bleeder screws, hardware, and pins with purchase to create a successful experience.

  1. AC Delco Disc Brake Calipers

If you want a lightweight brake caliper for your vehicle, then consider the aluminum model produced by this manufacturer. The unit is pressured-tested to ensure that you receive confident and safe braking experiences every time you hit the pedal. There is no extra stress placed on the brake-boosting mounting, enabling the product to create consistent results with a minimal amount of installation frustration.

You won’t receive the mounting bracket for the caliper in the box, but it does come with new clips for the brake pads. There can be some issues with the pistons not releasing pressure when letting go of the pedal, but the majority of installations with this product are successful when matched to the correct make and model.

Read also:

  1. Power Stop Calipers

If you carry heavy loads with your vehicle, then you need a set of calipers that can handle the stopping capacity of the weight you’re towing. These units will get the job done. The components are specifically engineered to handle the stresses of hauling, pulling, and mountain roads. It provides a dust-free braking performance by using a carbon fiber-ceramic formula to ensure a high-quality result every time.

Then the manufacturer uses a premium stainless steel shim to offer more heat dissipation. This feature improves your stopping power even more without blasting your ears with noise. The rotors that come with this kit also have slots and drill points to keep your brakes cooler in extreme driving conditions.

  1. Callahan Premium Semi-Loaded Calipers

These high-performance calipers do an excellent job of providing immediate stopping power for your vehicle. It creates the right amount of friction on the rotor without compressing the pads so far that damage accumulates over time. Installing them on your car is relatively straightforward, but you will likely need to bleed your brake system when you’re finished. You must also pay attention to the design because the driver and passenger sides are different.

The product is painted red to give your wheels a specific look. You’ll also receive the hardware for the brake kit so that a complete upgrade is possible. Each product is 100% tested to ensure that leaking doesn’t occur.

Does Your Vehicle Need New Calipers?

Cars need new calipers after 7-10 years of service or about 75,000 miles – whichever limitation occurs first. As the rubber seals start aging, they harden. That increases the risk of a leak happening.

You might also need new calipers if you’ve ground the brake pads on your vehicle down to the metal. Some of them won’t readjust to the original size, even if you have tools available that can reset the equipment.

The best brake calipers for your car will be a perfect fit when you purchase a kit that works with your specific make and model. Consider the options above today if your stopping power isn’t what it used to be so that you can continue to drive safely.

Add a Comment

Your email address will not be published. Required fields are marked *